UTILEV UT25C Operation And Maintenance Manual Download

Page: 38 / 149

36.

DO NOT engage forks into loads at high speeds.

Always make certain the load is stable before lifting the

forks.

Be sure to stop in front of the load before

engaging the forks, and make certain there are no

engaging the forks, and make certain there are no
obstacles, then engage the load by driving forwards.

obstacles, then engage the load by driving forwards.

37.

Make certain the load is well stacked and evenly

positioned across both forks. DO NOT attempt to lift a

positioned across both forks. DO NOT attempt to lift a
load with only one fork.

load with only one fork.

On the truck with an attachment such as a load

grab, make certain the load is securely and correctly

grab, make certain the load is securely and correctly
grabbed, and pull the loading control level to the full

grabbed, and pull the loading control level to the full
(increase to relieve pressure).

(increase to relieve pressure).

38.

Never lift loads when the truck is on an incline

Avoid loading work on a grade.

39.

DO NOT stack loads on forks in such a way that

the top of the load exceeds the load backrest height. If

the top of the load exceeds the load backrest height. If
this is unavoidable, make the load

this is unavoidable, make the load as secure as

as secure as

possible. When handling bulky loads which restrict

vision, operate the truck in reverse or have a guide

https://www.forkliftpdfmanuals.com/

Summary of Contents for UT25C






















































































































































Search results

Summary of Contents for UT25C

Reviews:

Related manuals for UT25C

Brands by name

Popular brands

UTILEV UT25C, Operation And Maintenance Manual

Search results

Summary of Contents for UT25C

Reviews:

Related manuals for UT25C

Brands by name

Popular brands