66
66
8. Parking
8. Parking
8.1 Parking Daily
8.1 Parking Daily
（
（
1
1
）
）
Park your truck on a level surface
Park your truck on a level surface
--
preferably in
preferably in
an open
an open area. If
area. If parking on
parking on a slope
a slope is unavoidable,
is unavoidable,
position the truck so that it crosses the slope and block
position the truck so that it crosses the slope and block
the wheels to prevent accidental roll.
the wheels to prevent accidental roll.
（
（
2
2
）
）
Make
Make sure
sure the
the shift l
shift level i
evel is
s in
in
the neutral
the neutral
position.
position.
（
（
3
3
）
）
Apply
Apply the parking brake.
the parking brake.
（
（
4
4
）
）
Shut the engine down and move the lift and tilt
Shut the engine down and move the lift and tilt
levers several times so that the inner pressure in the
levers several times so that the inner pressure in the
hydraulic tubes will be released.
hydraulic tubes will be released.
（
（
5
5
）
）
Remove the key and take
Remove the key and take it with you.
it with you.
!! W
Wa
arrn
niin
ng
g
：
：
You should tell the manager if you find
You should tell the manager if you find
any problems with the truck, and have them
any problems with the truck, and have them
repaired
repaired immediately
immediately..
Do the following things:
Do the following things:
（
（
1
1
）
）
Clean oil and grease stains with a cloth and
Clean oil and grease stains with a cloth and
water on the
water on the truck body.
truck body.
（
（
2
2
）
）
Check the whole truck, especially the tires.
Check the whole truck, especially the tires.
（
（
3
3
）
）
Fill the fuel tank with the proper fuel.
Fill the fuel tank with the proper fuel.
（
（
4
4
）
）
Check for leaks of hydraulic oil, engine oil, LPG
Check for leaks of hydraulic oil, engine oil, LPG
and coolant.
and coolant.
（
（
5
5
）
）
Fill lubricate grease.
Fill lubricate grease.
（
（
6
6
）
）
Check whether the junction plane between the
Check whether the junction plane between the
nuts of wheel boss and the piston of hydro cylinder are
nuts of wheel boss and the piston of hydro cylinder are
loose, and whether the surface of piston has been
loose, and whether the surface of piston has been
pulled.
pulled.
（
（
7
7
）
）
Check mast rollers op
Check mast rollers operate smoothly.
erate smoothly.
（
（
8
8
）
）
Lift the lifting cylinder to the top
Lift the lifting cylinder to the top and fill it with oil.
and fill it with oil.
（
（
9
9
）
）
In cold
In cold weather,
weather, it is
it is not necessary
not necessary to drain the
to drain the
antifreeze, but the water should be completely drained
antifreeze, but the water should be completely drained
from the radiator.
from the radiator.
https://www.forkliftpdfmanuals.com/
Summary of Contents for UT25C
Page 85: ...79 79 10 Labels 10 Labels https www forkliftpdfmanuals com ...
Page 90: ...84 84 7 7 Tip Over Warning Label Tip Over Warning Label https www forkliftpdfmanuals com ...
Page 119: ...113 113 https www forkliftpdfmanuals com ...
Page 139: ...133 133 IMPCO Single Fuel System IMPCO Single Fuel System https www forkliftpdfmanuals com ...
