Electric Soladora CONVEY 260
www.utiform.com
departamento.té[email protected]
Tfno. + 34 96 570 29 82 fax: + 34 96 570 29 83
12
When maintaining a certain height during a long time he/she can appear in the connection of the heads
jagged oxide, with the rising deterioration of the same ones, for what a regular cleaning of the jagged
connections is recommended.
The maintenance of these elements should be carried out periodically and to verify the state of the
jagged heads, as well as of the threads, bolts and fixation manetas. If an excessive waste is detected, the
corresponding piece will be substituted.
ATTENTION!
The safe-deposit grupilla is absolutely necessary. It should be substituted in the
event of loss or waste. To check the state of the cable of control of the hook of inertia periodically, as well as of
the safe-deposit cable.
3.3.8 Suspension
axis
The suspension axis doesn't specify maintenance and you cannot grease, since the fats can attack the
rubber bodies.
Not to carry out welding works in the axis.
3.3.9 Pneumatic
wheels
When changing the wheel it should be kept in mind that the correct bujes corresponds to the connections
of the wheels.
•
To press the ball-and-socket screws with the moment of marked turn.
•
The tires have to correspond with the data of the axis.
3.3.10 Control of inertia
To only repair the controls in an authorized shop and only with original pieces.
The controls of the wheels complete the norms on toxic substances and the regulatory scheme of the
UE.
3.3.11 Support and control chucks
To assure the wheels with both control chucks, so much in flat surface as slope to avoid that the vehicle
can rotate.
3.3.12 System of lights tow
The luminous bar is available in the version with 12 V and 24 V. The assembly of this system of lights
is carried out following the following steps:
•
He/she catches the bar of illumination and he/she enters in the later part of the machine, assuring it
with two willing jetty pins for such a function.
•
To catch the cable of light with their peg normalizes of the bar of illumination and it is connected in
the base of 7 poles that is located in the lateral part of the machine.
•
To connect the plug prepared in the front part of the tow, in the area of the tow lance and to connect
it with the traction vehicle.
•
For the disassembly it is necessary to carry out the contrary process.
Summary of Contents for Convey 260
Page 42: ...Zerlegung ...
