Electric Soladora CONVEY 260
www.utiform.com
departamento.té[email protected]
Tfno. + 34 96 570 29 82 fax: + 34 96 570 29 83
25
End of the transport
When the mixture deposit is completely empty of material, the compressed air begins to leave without
obstacles for the hose of transport, for what means that we have finished with this process.
Next, to close the spherical key (1) toward the auxiliary compressor. To rotate the switch-investor
shatters triangle in position rest.
When these processes have concluded, to open the cover and to begin with the following process of
blended.
Finalization of the work
To keep in mind the manometer of pressure (7). It lowers the pressure below 2 bar, one can throw of the
lever (2) up, nevertheless, as suitable previously, it is necessary to work the lever (3) safe-deposit before
opening the boiler cover.
7.7
Load chute
The load chute is a device of load hydraulics for the deposit of blended. It combines two advantages:
it takes advantage of part of the operative's work, that is to say, their time and he/she makes possible
that he/she gets ready a new soled mixture while he/she is carried out a process of transport.
The operation of this load chute is carried out by means of a hydraulic system prepared in the machine.
A hydraulic bomb coupled in the reductora of the deposit of blended that works a hydraulic cylinder of simple
effect that makes that the load chute ascends exists and lower by means of the action of an existent lever in the
willing hydraulic distributor for such a function.
The load chute only works if the machine is working
7.8
Haulage shovel
The shovel system crawls it consists a shovel that is thrown by an of steel cable wound to a drum-pulley
worked by a hydraulic motor toward the machine.
Working this haulage shovel by means of a control prepared in the same one the sand crawls toward the
load chute it stops later on to introduce it inside the mixture deposit.
The manipulation of this control in the haulage shovel works a hydraulic electroválvula that works the
operation of a hydraulic motor that is the one that picks up the cable of steel of the pulley drum and in turn, it
works the haulage shovel.
7.9
Grease aut Remote control
The machine takes installed of series a power station of it greases automatic to lubricate the points of it
greases of the machine, without necessity of carrying out the operative manually.
The function of this power station carries out it a temporized of it greases located inside the electric
square that in turn has incorporated other functions that next we detail:
The temporization "UTIFORM" has two basic functions:
to) Control of electro valve at 12V.
b) temporized Control of a motor of it greases at 12V.
Summary of Contents for Convey 260
Page 42: ...Zerlegung ...