Electric Soladora CONVEY 260
www.utiform.com
departamento.té[email protected]
Tfno. + 34 96 570 29 82 fax: + 34 96 570 29 83
6
It is necessary to change all the pieces that are not in a perfect state immediately. To only use exchange
pieces and of original waste.
When using pieces non originals it is not guaranteed that these are built and manufactured in a resistant
and sure way, for what is expired in that same moment or expired guarantee some on the machine.
2.8
Cleaning of the machine.
It is indispensable to maintain the machine free of inlays, for that which is recommended to use a
biological conservator of machines, as liquid of separation protection and corrosion.
In any case to use gas oil fuel for the cleaning and the care of the machine, since it can produce
irreparable damages, mainly the meetings and pieces of plastic are the most affected.
To use and to evacuate the substances and used materials, mainly:
•
in works carried out in systems of it greases and devices of it greases
and
•
in the cleaning with solvent.
2.9.1
Safe-deposit norms for passable machines
General safe-deposit indications
1.
The person that works the machine has the responsibility that the machine stays in a state of sure
operation.
2.
To only use the oils of it greases and recommended lubricant and authorized by UTIFORM. To keep in
mind that the elected lubricants complete all the safe-deposit norms, mainly what concerns to the danger
of fires by reason of the oil or explosions and the possibility of the formation or transformation of
dangerous gases.
3.
The responsible person has to keep in mind them to be completed all the norms strictly regarding the
handling and the maintenance of the machines and the tools.
4.
The maintenance works, revision and repair can only be carried out for qualified personnel, when
necessary under the surveillance of a person specially formed for these works.
5.
If any indication or suspicion that a piece inside the machine has warmed existed, the machine should be
disconnected. In any case he/she opens up you the control tapes before the machine has cooled down the
sufficiently with the purpose of avoiding a car-fire from the vapours of oil when mixing with the oxygen.
6.
All the maintenance works must be carried out with the stopped machine.
7.
Before disassembling any piece that low pressure is, to cut the compressor or the team of all the sources
of pressure efficiently and to discharge of pressure the complete system. Also, it is necessary to put in
each closing valve a warning poster saying they are being carried out works in the machine, not to open
up."
Summary of Contents for Convey 260
Page 42: ...Zerlegung ...
