64
9 - START UP PROCEDURE
9.18 Return To The Factory Settings
• Press the two Menu buttons
simultaneously and
then
(+)
button until
symbol flashes on the menu
bar.
• Select the
INSTALLER
menu using
.
"COdE"
appears on the display.
• Use
(-)
or
(+)
button to input the installer code
"
0012
".
•
Confirm using button. P:1 is displayed with 1 flashing.
• Press the
[+]
button several times
p:df
is displayed
with
df flashing.
• Press
button
df:x is displayed with x flashing.
This is the current value of X for
dF
. Check this against
the value of X on the type plate.
• Enter the value of X shown on the type plate using the
[-]
or
[+]
button.
•
Confirm the value with the
button,
df:y
is
displayed with y flashing. This is the current value of Y
for
dU
. Verify the value of
y
on the rating plate is the
same.
• Enter the value of
y
shown on the rating plate using the
[-]
or
[+]
button.
•
Confirm the value with the
button. The factory
settings are reset.
• The display returns to the current operating mode.
...x
-
-
3x
dF =1 dU =1
P/N 240011654, Rev. C [06/08/2017]
