Utax P-C3060DN, User Manual

Page: 50 / 153

Using the Operation Panel 2-25
5
Press [OK] . The job name entered in the printer driver (
Report
, in
this example) appear with a blinking question mark (
?
) before the
letters.
6
Press

or

to scroll to the desired job title.
7
Press [OK] . The number of copies to be printed can be set. To
increase the copy count, press  to decrease the copy count, press
 .
8
Press [OK] to finalize the copy count. The printer prints the specified
number of copies for the job.
Deleting a Proof-and-Hold Job
1
Follow steps 1 through 6 in the above section to let the title of the job
to be deleted displayed.
2
When the title of the job to be deleted is displayed, e.g.
Report
,
press [OK] . The cursor (_) below the copy count starts to blink.
3
Press  repeatedly until
Delete
appears below the title.
4
Press [OK] . The message
Processing
appears and the stored job
is deleted.
Private/Stored (Printing a private print/stored job)
In private printing, you can specify that a job is not printed until you
release the job from the operation panel. When sending the job from the
application software, specify a 4-digit access code in the printer driver.
The job is released for printing by entering the access code on the
operation panel ensuring confidentiality of the print job.
In the stored job mode, access codes are not mandatory, but can be set
on the printer driver if printing with PIN security is required. Then, the
access code must be entered on the operation panel to print a stored job.
Print data will be stored in the SSD after printing.
Refer to Printing System Driver User Guide for the driver settings.
Releasing a Private/Stored Job
1
Press  while
Job Box >
is displayed.
2
Press

or

repeatedly until >Private/Stored appears. The
name entered in the printer driver (
Harold
, in this example) also
appears.
3
Press [OK] . A blinking question mark (
?
) appears before the user
name.
>Arlen
?Report
Note If you selected
All Files
, this process is applied to
all the documents in the Quick Copy/Proof-and-Hold.
>Report
Copies 001
Note
If you selected
All Files
, press

after
Copies
--
- is displayed to set the number of copies. When using the
number of copies specified with print job, select
Copies
---.
>Report
Copies 001
>Report
Delete
>Private/Stored
?Harold