Utax P-C3060DN, User Manual

Page: 47 / 153

2-22 Using the Operation Panel
Job Box
IMPORTANT
To use the Job Box, an optional SSD must be installed in
the printer. The SSD must be formatted from the printer. For more
information, refer to
SSD (Using the optional SSD) on page 2-67 . The
RAM disk may also be used in the Proof-and-Hold and Private Print
modes. For more information, refer to
RAM Disk Mode (Using the RAM
disk) on page 2-66 .
Job Box is a print function that makes the Job Retention function possible.
The settings are specified from the printer driver. Refer to
Printing System
Driver User Guide for the driver settings.
Job Retention
Job Retention has four modes as summarized below. These modes are
selected from the printer driver through the application software:
The options available in Job Box are as follows:
• Using Quick Copy/Proof-and-Hold
Quick Copy (User Name) (Selecting the User)
(User Name) (Data Name) (Selecting the data)
(Data Name) Copies (number of copies) (Number of copies / deleted)
Quick Copy Proof-and-Hold Private Print Stored Job
Primary function To later print
additional copies To proof the first copy
before printing
multiple copies To hold the document
in printer to prevent
unauthorized access To electronically store
documents such as
fax cover pages
Start storing by Printer driver Printer driver Printer driver Printer driver
On terminating print
setting from
application software Prints simultaneously Prints one copy
simultaneously Does not print Does not print
Retrieved by Operation panel Operation panel Operation panel Operation panel
Default number of
copies printed at
retrieval Same as storing
(can be changed) One less
(can be changed) Same as storing
(can be changed) One
(can be changed)
Maximum number of
jobs stored
†
32, expandable to 50 32, expandable to 50 Depends on the SSD
capacity (the job is
automatically deleted
after printing) Depends on the SSD
capacity
PIN security No No Yes Yes (if necessary)
Data after printing Stored Stored Deleted Stored
Data at power off Deleted Deleted Deleted Stored
SSD Necessary Unnecessary
(RAM disk may also
be used) Unnecessary
(RAM disk may also
be used) Necessary
†. Jobs in excess will cause the earlier ones to be deleted.
Note
Refer to the Printing System Driver User Guide for the
driver settings and print (save) procedures.