Utax CLP 3416, Instruction Handbook Manual

Page: 58 / 166

3-18
Setting your machine
• servers , allows you to identify the name of the IP address of Internet SMTP providers (send) and
POP3 (MBX reception) and the address of DNS 1 and DNS 2 servers. The server address is made
up of 4 groups of 3 digits maximum, separated by dots.
• SMTP Authentification , used to activate the authentification protocol when the SMTP server
used requests this to end e-mails.
Access to connection and message service parameters
91 OK - INTERNET / SUPPLIER
+
Select the Internet provider from the list
NO ACCESS
,
PROVIDER_1
,
PROVIDER_2
,
PROVIDER_3
,
PROVIDER_4
,
PROVIDER_5
,
PROVIDER_6
or
LOCAL NETWORK
, and
press
OK
.
Choosing
NO ACCESS
disables access to Internet functions.
92 OK - INTERNET / INIT. PROVIDER
921 OK - INTERNET / INIT. PROVIDER / CONNECTION
+
Enter the
CALL NUMB.
, press
OK
.
+
Enter connection
IDENTIFIER
1
, press OK .
+
Enter connection
PASSWORD
, press OK .
922 OK - INTERNET / INIT. PROVIDER / MESS. SERV
+
Enter Email
IDENTIFIER
, press
OK
.
+
Enter Email
PASSWORD
, press
OK
.
+
Enter
E-MAIL ADR
, press
OK
.
Access to servers parameters
923 OK - INTERNET / INIT. PROVIDER / SERVERS
+
Enter
SMTP
, press
OK
.
+
Enter
POP3
, press
OK
.
+
Enter
DNS 1
, press
OK
.
Access to the authentification SMTP parameters
924 OK - INTERNET / INIT. PROVIDER / SMTP AUTHENT.
In the ACTIVATION menu, select WITH to activate SMTP authentification then validate with OK
key.
1. If the identifier has more than 16 characters, the text will automatically slide over to the left.