Utax CLP 3416 Instruction Handbook Manual Download

Page: 130 / 166

6-14

Maintenance

Cleaning the Paper Transfer Unit

Print problems such as soiling of the reverse side of printed pages may occur if the paper transfer unit
becomes dirty. To clean the paper transfer unit, you must use the cleaning cloth included in the toner kit.

While pulling the green paper transfer unit release lever, pull out the paper transfer unit.

Wipe away the paper dust on the registration roller and the paper ramp using the wiper cloth
included in the toner kit.

Note:

Be careful not to touch the black transfer roller during cleaning as this may adversely affect print quality.

Push the paper transfer unit back in completely.

Paper Transfer Unit

Release Lever (Green)

Paper Transfer Unit

Paper Ramp

Transfer Roller

(Black)

Registration Roller (Metal)

Summary of Contents for CLP 3416







































































































































































Search results

Summary of Contents for CLP 3416

Reviews:

Related manuals for CLP 3416

Brands by name

Popular brands

Utax CLP 3416, Instruction Handbook Manual

Search results

Summary of Contents for CLP 3416

Reviews:

Related manuals for CLP 3416

Brands by name

Popular brands