Utax CA-3100 Service Manual Download

Page: 53 / 287

2-25

Installation

＞

Installing the optional parts

[CONFIDENTIAL]

(3) SSD

（

HD-6/HD-7

）

Turn off the main unit and disconnect the power cord and all interface cables.

Remove two screws (b) and the option slot cover (a).

Attach the SSD to the main unit

Insert the SSD (a) in an option slot (c).

Fix the SSD (a) with using two screws to main unit.

• When attaching the new SSD, display appears at the 1st start-up to induce formatting

Format SSD

When an optional SSD is inserted into the printer for the first time, it must be formatted before use.

Format procedure

[Menu] key > [

▲

] [

▼

] key > [Device Common] > [OK] key > [

▲

] [

▼

] key > [Format SSD] > [OK] key

Format an optional SSD.

Note

The shutdown confirmation screen is displayed. It might take about three minutes to shut down.

Important

•

Formatting will destroy any existing data on a storage device including a used SSD.

Summary of Contents for CA-3100































































































































































































































































































Search results

Summary of Contents for CA-3100

Reviews:

Related manuals for CA-3100

Brands by name

Popular brands

Utax CA-3100, Service Manual

Search results

Summary of Contents for CA-3100

Reviews:

Related manuals for CA-3100

Brands by name

Popular brands