Utax CA-3100, Service Manual

Page: 42 / 287

2-14
Installation
＞
Installing the main unit
[CONFIDENTIAL]
(8-2)Network Setup
Configuring the Wired Network
Set up TCP/IP (IPv4) to connect to the Windows network.
TCP/IP
（
IPv4
）
setting
Set up TCP/IP (IPv4) to connect to the Windows network.
The default settings are as follows.
• TCP/IP
：
On
• DHCP
：
On
• Auto-IP
：
On
• IP address
：
0.0.0.0
• Subnet Mask
：
0.0.0.0
• Default Gateway
：
0.0.0.0
1
Display the screen.
[Menu] key > [ ▲ ] [ ▼ ] key >[Network] > [OK] key > [ ▲ ] [ ▼ ] key > [Wired Netwk. Set] > [OK] key >
[
▲
] [
▼
] key >[TCP/IP Settings] > [OK] key > [
▲
] [
▼
] key > [IPv4 Setting] > [OK] key
2
Configure the settings.
When using DHCP server
1
[
▲
] [
▼
] key > [DHCP] > [OK] key > [
▲
] [
▼
] key > [On] > [OK] key
When setting the static IP address
1
[ ▲ ] [ ▼ ] key > [DHCP] > [OK] key > [ ▲ ] [ ▼ ] key > [Off] > [OK] key
2
[ ▲ ] [ ▼ ] key > [IP Address] > [OK] key
3
Set the IP address.
Note
The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP
(IPv4), TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and
other platforms.
Note
The factory default login user name and login password are set as shown below.
• 45 ppm model: Login User Name/ Login Password
：
4500 / 4500
• 50 ppm model: Login User Name/ Login Password ： 5000 / 5000
• 55 ppm model: Login User Name/ Login Password
：
5500 / 5500
• 60 ppm model: Login User Name/ Login Password ： 6000 / 6000
Note
You can set any value between 000 and 255.
Use the numeric keys or select the [
▲
] or [
▼
] key to enter a number.
Select the [ ◄ ] or [ ► ] key to move the position being entered, which is shown highlighted.