Utax CA-3100 Service Manual Download

Page: 40 / 287

2-12

Installation

＞

Installing the main unit

[CONFIDENTIAL]

(7) Power On

Turn the power switch (a) on. (ON)

(8) Default Setting

Before using this machine, configure such settings as date and time, network configuration, and energy saving functions
as needed.

Important

Only use the power cable that comes with the machine.

Note

When the power is turned on for the first time, the toner installation operation is performed. (About 5 minutes)

Important

When turning off the power switch, do not turn on the power switch again immediately. Wait more than 5
seconds, and then turn on the power switch.

Note

The default settings of the machine can be changed in System Menu.

た

な

は

わを
ん、。

あ

か

さ

ら

ま

や

ȮŎŦůŶġȯŬŦź

Summary of Contents for CA-3100































































































































































































































































































Search results

Summary of Contents for CA-3100

Reviews:

Related manuals for CA-3100

Brands by name

Popular brands

Utax CA-3100, Service Manual

Search results

Summary of Contents for CA-3100

Reviews:

Related manuals for CA-3100

Brands by name

Popular brands