Operating Manual
www.ushio.com
5
Stopwatch Button:
The
GREEN
stopwatch button can be used to program a custom
LED on-time duration. Pressing and holding the stopwatch button for over half a second will
turn on the UV output and keeps the UV on until the button is released. The amount of time
that the button was held down is recorded. The next time, tapping the stopwatch button for
a short time will turn on the UV output for the recorded amount of time instead of the default
of 4 seconds. This recorded time is stored until the batteries are removed.
WARNING!
Upon power up, the UDC UV drives the LED to full intensity. Avoid
looking directly at the LED when turning ON.
Preset Timer Buttons:
Pressing momentary button next to this symbol
turns on the unit for 4 seconds preset duration.
Pressing momentary button next to this symbol
turns on the unit for 8 seconds preset duration.
Battery Hatch Door:
The battery cover seals the battery and electronics within the body of
the
UDC PSC
.
Specifications
Dimensions
Length:
Width:
Height:
Weight:
24mm (0.95”)
46mm (1.8”)
74mm (3.2”)
126.8g (4.5 oz)
Illumination System
Type & Power Rating:
Wavelength:
LED Electrical Power:
Light Emitting Diode (LED)
365 or 405nm
3 Watts
Power System
Power Source:
Battery Type:
Battery Life for Continuous Runtime:
Battery Charge Time:
Battery Recharge Cycles:
Battery Powered (2 x RCR123A)
(2) Lithium Ion RCR123A 3.0V, 900mAh minimum
60 minutes
4 hours
500 Charge Cycles
Environment
Operating Ambient Temperature Range:
Storage Temperature Range:
Humidity:
Mode of Operation:
10ºC to 40ºC (50°F to 104°F)
-15ºC to 55ºC (-5°F to 131°F)
0 – 95% RH
Continuous
