Midori
™
UDC Portable Spot Cure
www.ushio.com
8
3. UDC PSC Operation, Batteries and Charger
UDC PSC Operation
The
UDC PSC
unit’s internal LED operates on 2 rechargeable Lithium-Ion batteries and
provides approximately 60 minutes of continuous operation when used with new or fully
charged batteries.
Battery Installation
1. At the bottom of the
UDC
’s battery hatch door, rotate the locking knob counterclockwise
until the line on the knob is pointing 90° from the indentation mark on the hatch.
Remove the hatch. Refer to figure 2.
2. Insert the batteries into the unit using the battery symbol orientation as a guide.
The negative terminal of each battery should be in contact with the spring on each
circuit board, refer to figure 3. Attach the hatch door then rotate the locking knob
clockwise until the line on the knob is pointing toward the indentation mark.
Note: For added safety, the battery hatch door may only be inserted into the
UDC PSC
body in one direction. If the door does not easily slide into the case, rotate the hatch
door 180°. This ensures the battery polarity cannot be reversed.
To remove batteries, rotate the battery hatch door knob counterclockwise a quarter turn until
it stops, remove the door and allow the batteries to slide out.
Figure 2: Bottom View
Figure 3:
UDC PSC
Battery Installation
