background image

Operating Manual

www.ushio.com

15

6.  Limited Warranty 

Ushio America Inc. warrants the Midori

 

UDC Portable Spot Cure LED Light Source

when new, to be free of defects in material and workmanship and to perform in  

accordance with the manufacturer’s specifications when subject to normal use and  

service for a period of 1 year from the date of purchase from Ushio America or an  

authorized agent. Ushio America will either repair or replace any components found to be 

defective or at variance from the manufacturer’s specifications within this time at no cost 

to the customer. It shall be the purchaser’s responsibility to return the instrument to the 

authorized distributor, agent, or service representative.

All non-warranty repairs will be warranted to be free from defects in materials and  

workmanship for a period of ninety (90) days from the date of the invoice.

This limited warranty does not cover the breakage or failure due to tampering,  

misuse, neglect, accidents, improper installation, modification, shipping, or to improper  

maintenance, service, fluid invasion and cleaning procedures. This limited 

 

warranty is also void if the instrument is not used in accordance with the manufacturer’s  

recommendations or if required service is performed by anyone other than Ushio  

America or an authorized agent. The purchase date determines limited warranty  

requirements. No other express or implied limited warranty is given. Suitability for use 

of the device for any procedure shall be determined by the user. Ushio America Inc. shall 

not be liable for incidental or consequential damages of any kind.

7.  Agency Approvals

The 

UDC PSC

 unit has been tested to, and found in conformance with, the following standards:

EN50581:2012
2006/95/EC (93/68 EEC) – Low Voltage Directive
IEC 62471:2006 LED Photobiological safety lamp standard, categorized as 

Risk Group 3 (High Risk).

2011/65/EU – RoHS Directive

WEEE

8.  Manufacture Contact Information

Manufactured and Serviced by:
Ushio America, Inc. 

5440 Cerritos Ave. 

Cypress, CA 90630 USA 

Tel: +1.714.236.8600

Fax: +1.714.229.3180

Toll-Free: +1.800.838.7446

[email protected]

www.ushio.com

Summary of Contents for 9500037

















Reviews: