Operation Manual
-
３
-
2-4 Assembly of machine stand
Referring to the following drawing:
Step 1: Rotate the stand pillars into screw thread-holes in the pillar bars, and then
connect the pillar bars to left and right columns with screws respectively.
Step 2: Connect the crossbeam to left and right columns with screws.
Step 3: Join the paper hanger to the inside of the left and right columns with screws.
Step 4: Join the connection board to the top of the left and right columns with
screws.
Step 5: Lay down the four pillars of main machine, place the machine on the
connection board, and then insert the pillars into the connection board to connect to
the main machine.
Step 6: Place the paper-roller on the roller of paper hanger.
