Operation Manual
-
１４
-
Chap 9 After Work Over
After work is over…
1.
Remove the paper.
2.
Remove the cutter holder or plotter holder, then wipe it clean with a
soft-cloth and keep it properly.
3.
Turn off the power, and pull the power cord out if not using during a long
time.
4.
Cover the machine with a cloth or a cover.
Chap 10 Using life of the cutter
Cutter is the most expensive consumption for this machine. And its using
life is also limited, but you can use it as long as possible.
Note:
1.
More longer the out-stretching length of the cutter, more shorter the using
life. Please avoid cutting off the bottom layer during the process of cutting.
2.
The more cutting force, the shorter the using life.
3.
As for different materials, the requirement to the cutter sharpness is
different.
4.
Set the cutting force as little as possible; only increase it when the cutter
feels blunt.
5.
As for the cutters from different factories, the using life is also very
different.
6.
Renew the cutter timely when it blunt in case of affecting the machine
performance. As an urgent method, a piece of leather can be used to sharpen
the blade tip just like sharpening a razor
