Operation Manual
-
１６
-
Why is the pattern deformed or incomplete?
1.
More pressure or too long blade tip or too dirty platen or too soft stickiness,
all of these factors can cause more resistance to the two faces of paper and
make it fall behind the roller rotating, thus result in deformed pattern.
2.
The software setting isn’t proper. (The tool compensation value is too big)
3.
The carriage belt is too loose, or the roller can’t exactly follow the motor
running.
4.
The motor maybe doesn’t run all the steps.
5.
The pattern is normal but not complete, this may be resulted from the too
small tool compensation value.
Why does the machine plot abnormally?
1.
Software setting is not matched to the machine, so you must adopt proper
commands sets or set proper tool compensation value.
2.
The plotting software is suddenly broken up.
3.
Plotting software has been damaged or there is virus in computer.
Why does the paper run deviation?
1.
The stickiness isn’t placed right.
2.
The platen is too dirty so that the resistance from two sides can’t be
balanced when the paper is moving.
3.
The pinch rollers have been deformed or don’t match to each other.
4.
The pressure of the pinch roller is a little smaller and the paper is very
sensitive to the external force.
5.
The balance of the stickiness weight isn’t very good.
