Operation Manual
-
９
-
Dynamic screen
: LCD displays:
Current point
: the place of cutter/plotter at present.
Original point
: the place of cutter/plotter just at the time of confirming
“Local” state.
Direction keys
: 4 keys:
←、↑、→、↓
Origin set-up
: change the place of cutter/plotter.
5-2-2 Features of functions
In static or dynamic screen state:
1.
Speed can be freely changed.
2.
Pressure can be freely changed.
3.
The machine is always in remote state.
5-2-3 Functions realization
1.
Plotting function: in the static or dynamic screen state, the machine will start to
cut after computer outputs graphical data to it.
2.
Speed regulation: adopts the mode of bi-direction circle, and speed can be
regulated grade-by-grade by “
↑
” or “
↓
” key. In the state of the static or
dynamic screen, first pressing the “
↑
”or “
↓
” key can check up current speed
state. Afterwards, before automatically returning to the last screen, pressing
“
↑
” once can increase speed one grade and if keeping pressing it, speed will be
increased quickly. When speed reaches to the highest value, pressing “
↑
” key
will make it be the lowest. On the contrary, it is to be. After the regulation,
system will return to the last screen automatically.
3.
Pressure regulation: also adopts the mode of bi-direction circle and pressure can
be adjusted grade-by-grade by “
←
”or “
→
” key. In the static or dynamic screen
state, first pressing “
←
” or “
→
” key can check up current cutter pressure state.
Afterwards, before automatically returning to the last screen, pressing “
→
”
key once will increase pressure one grade and keeping pressing it can rapidly
increase pressure. When reaching to the highest value, pressing “
→
” key will
make pressure be the lowest .On the contrary, it is to be. After the regulation,
system will return to the last screen.
5-2-4 Local function
1. Origin setup:
Now is cutting…
Local? (ENTER)