USC LPH800, Operator'S Manual, Page: 43 / 76

Page 43
LPH800 TREATER
Maintenance
Section
G
DRIVE AND DRUM

Inspect all welds and structural components on frame and drum for bends,
cracks and damage.

Remove shields and inspect pillow block bearings.

Inspect drive wheels for unordinary wear, and setscrews for tightness.

Inspect the Neoprene idler wheels.

Tighten and lubricate chain.
PUMPS AND PLUMBING

Check pump in forward and reverse.

Make sure pump heads open and close smoothly.

Inspect tubing and for uneven wear. Replace pump tubing often to ensure high
flow rates can be met.

Tighten hose clamps and check filter. Clean filter frequently to avoid blockages

Flush flow meter with clean water frequently to avoid chemical buildup.
Proper maintenance of the LPH800 Seed Treater is critical for peak performance,
reliability and accuracy of this system. The following is a guideline for the type of
maintenance and servicing that should be performed on this unit. Your environment
and uses may require additional maintenance and service beyond this list to assure
a reliable and safe unit. The operator of this unit has ultimate responsibility to identify
areas of concern and rectify them before they become a hazard or safety issue. There
is no substitute for a trained, alert operator.
Do not put this unit into operation with any questionably
maintained parts. Poor performance or a hazard may occur.