User Guide Ver:1.1 Page:
23
Tip:
You can also change your password by right-clicking the USBK icon
on the
notification area, then dragging your mouse on to
Settings
and clicking
Password
. Then,
follow up the same instructions explained above starting from 2. Step.
Forgetting your password
There is no support on USBK for forgotten password.
If you forget your password, you can set a new password by taking your USBK to Fabric
Default. After 3 wrong password attempts, USBK erases all your encryption key(s) and
password, returns back to Fabric Default. You are forced to set new password same as at
first usage.
!
CAUTION:
After this password setting, random encryption key(s) is assigned on your
USBK. That’s why; set your encryption key(s) same with old(s) in order to access data on
your BackDisk and prevent data lost.
Auto-Activation Property
With Auto-Activation property, you configure your USBK to automatically start when you plug
it in a HostSystem. So, you can use your USBK on hostsytems which do not have any user
interface for password entry.
When Auto-Activation is enabled, USBK does not ask for password confirmation to verify
user. Thence, it can be used directly on test & measurement equipments such as
oscilloscope, EKG, etc.
NOTE:
To enable Auto-Activation, the status of device must be “
Deactivate
”. You can check
the status of your device on the Control Panel of USBK. If the status is
Activate
in green,
click
Deactivate Key
button.
Settings
menu will be enabled and get color in red.
To enable Auto-Activation
1. On the Control Panel of USBK, under
Settings
, click
Auto-Activation
.
2. Check the
Auto Activation Key
checkbox.
3. Select the key that you want to auto-activate from
Key
combobox.(Valid for A103
model. If you are using A101 model, pass directly to the next step).
