US Robotics USR8700 Page 143 User Manual Download

Page: 143 / 156

Serial ATA 4-Drive NAS

User Guide

Troubleshooting - 141

displays in parentheses the number of users, AD Bind Point total users, and the limit for number of users.

If the numbers within the parentheses indicate zero users and zero AD Bind Point users (0/0/128),
navigate to the

Advanced : System Log

page and look for synchronization or clock errors.

If synchronization or clock errors are indicated, navigate to the

Advanced : System

page and compare

the system time settings with the Active Directory server’s time. If they are not within five minutes of each
other, change the time for the storage system (as described in

“Changing the System Settings”

page 69) so that their times match. Return to the

Users : Users & Computers

page and click

Synchronize Now

The storage system is not distributing IP addresses.

Make sure that

Enable DHCP server

is selected on the

Network

page (as described in

“Changing the

Network Settings”

on page 72), and that the starting and ending IP addresses are valid. The first three digit

groups of both the starting IP address and ending IP address must be the same.

Summary of Contents for USR8700





























































































































































Search results

Summary of Contents for USR8700

Reviews:

Related manuals for USR8700

Brands by name

Popular brands

US Robotics USR8700, User Manual

Search results

Summary of Contents for USR8700

Reviews:

Related manuals for USR8700

Brands by name

Popular brands