US Robotics USR8700 Page 71 User Manual Download

Page: 71 / 156

Serial ATA 4-Drive NAS

User Guide

Managing Your Storage System - 69

5. When the confirmation message appears, click

You can now unplug the USB device.

Changing the System Settings

The

System

page displays the settings that you specified when you initially configured the storage system,

such as the storage system name, and the current date and time. You can also change the administrator
name and password used for logging into the Web User Interface.

In local authentication mode, you can change any of these settings at any time. In Active Directory

Note:

If you inadvertently disconnect a USB device that you need to retain, unplug it from the

storage system, plug it back in, and then click

Scan

. This reactivates the USB device.

Since the USB device always remains on the

Shared Folders

page, any user assignments

are always retained.

Summary of Contents for USR8700





























































































































































Search results

Summary of Contents for USR8700

Reviews:

Related manuals for USR8700

Brands by name

Popular brands

US Robotics USR8700, User Manual

Search results

Summary of Contents for USR8700

Reviews:

Related manuals for USR8700

Brands by name

Popular brands