manualshive.com logo in svg

US Robotics USR5454, User Manual

Share
Download
US Robotics USR5454 User Manual Download Page 56

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/device.html

 

Back up Settings

At any time, you can use Back Up Settings to save a backup file of your current access point 

configuration, such as before you make significant changes to your access point 

configuration, or after you have successfully applied changes. 

 

To save your settings:

1.  Select 

Back Up

. 

2.  A window appears. Click 

Save.

3.  Browse to the location at which you want the backup file saved and click 

Save. 

 

Restore Settings

If you ever lose your settings or if your settings have changed and the access point is not 

functioning properly, you can restore your saved settings from a backup file. If you did not 

create a backup file, you may need to 

restore the default settings

. 

 

file:///G|/CSO/Documentation/Documentation%20-%20Dr...5454%20Mach-1%20AP/User%20Guide/English/device.html (3 of 5)10/26/2006 9:47:10 AM

Summary of Contents for USR5454



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands