manualshive.com logo in svg

US Robotics USR5454, User Manual

Share
Download
US Robotics USR5454 User Manual Download Page 29

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/status.html

will not show up in the 

Clients

 list. Also, devices that are connected through a 

WDS connection will be displayed as 

wired

 clients. 

 

●

     

MAC Address

: The MAC address of the connected device. 

●

     

Association Time

: The timeframe before the lease will expire for the connected 

device. 

●

     

Authorized

: If the client is authorized to connect to this gateway, the status will 

display as 

Yes

. If the client is not authorised to connect to the gateway, the 

status will display as 

No

. 

●

     

WMM Link

: If the client supports WMM, the status will display as 

Yes

. If the 

client does not support WMM, the status will display as 

No

. 

●

     

Power Save

: If the client is running in Power Save mode, the status will display 

as 

Yes

. If the client is not in Power Save mode, the status will display as 

No

. 

 

© 2005-2006 U.S. Robotics Corporation

file:///G|/CSO/Documentation/Documentation%20-%20Dr...5454%20Mach-1%20AP/User%20Guide/English/status.html (5 of 5)10/26/2006 9:47:08 AM

Summary of Contents for USR5454



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands