manualshive.com logo in svg

US Robotics USR5454, User Manual

Share
Download
US Robotics USR5454 User Manual Download Page 55

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/device.html

Upgrade Access Point

Firmware updates may be available on the USRobotics website to upgrade your device with 

new or improved features. If you are experiencing problems with your device, you may want 

to check for firmware updates. 

 

1.  Click 

Check for Update

 to search for the latest firmware from 

www.usr.com

 and save 

the firmware file to your computer.

2.  Click 

Browse

 to locate and select the new firmware file.

3.  Click 

Upgrade

 to begin the update process.  

 

The access point may disconnect and reconnect to the Internet during the update. 

When complete, you will be prompted to log back in to the access point. 

You should then see the new version of firmware listed on the Status page. If 

you do not, repeat the upgrade procedure.

file:///G|/CSO/Documentation/Documentation%20-%20Dr...5454%20Mach-1%20AP/User%20Guide/English/device.html (2 of 5)10/26/2006 9:47:10 AM

Summary of Contents for USR5454



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands