manualshive.com logo in svg

US Robotics USR5454, User Manual

Share
Download
US Robotics USR5454 User Manual Download Page 21

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/client_connect.html

1.  Ensure that the wireless adapter to be connected to the network is set to infrastructure mode. For instruction in 

changing your adapter's wireless mode, see your wireless adapter's documentation.

2.  Set the network name or SSID in the wireless adapter's settings to the Network name that is used on the access 

point. You can find the network name for the access point on the 

Status

 page. 

3.  Ensure that the wireless security settings for the wireless adapter match those that you set on the access point. 

You can find the wireless security settings for the access point on the 

Status

 page. For instruction in changing your 

adapter's wireless security settings, see your wireless adapter's documentation.

*

 BROADCOM, SecureEasySetup, and the SecureEasySetup logo are trademarks or registered trademarks of Broadcom 

Corporation in the United States and/or other countries.

© 2005-2006 U.S. Robotics Corporation

file:///G|/CSO/Documentation/Documentation%20-%20Dra...Mach-1%20AP/User%20Guide/English/client_connect.html (2 of 2)10/26/2006 9:47:07 AM

Summary of Contents for USR5454



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands