UC1114 User Guide
19
4.5.1.4 IF the Device Restarts
A command containing this IF condition will be triggered once the device has finished restarting.
4.5.2 Supported THEN Actions
4.5.2.1 THEN Change Output
A command containing this action will change the selected output according to specified actions.
The user can choose from the following actions:
•
Will be activated
•
Will be deactivated
•
Will follow the input to change: When the triggering condition is the Input Changes State, you
can then select change state as the action.
If the user has configured:
➢
"Delay Time", the selected output will be activated after the specified time.
➢
"Duration", the output will remain current status for a certain period of time.
4.5.2.2 THEN Restart the Device
A command containing this action will restart the Ursalink UC1114 if the condition is met.
Summary of Contents for UC1114
Page 1: ......
