UC1114 User Guide
20
4.5.2.3 THEN Send a Custom Message
A command containing this action will send a custom text message defined via LoRaWAN if the
condition is met. Only letter, number, comma, period, separator, space and exclamation mark are
allowed in the message, and the maximum character length is 60.
4.6 Upgrade
Step 1: Connect Ursalink UC1114 to PC via micro USB port.
Step 2: Power on the Ursalink UC1114.
Step 3: Run the Ursalink ToolBox and go to "Upgrade".
Step 4: Click "Browse" and select the correct firmware file from the PC.
Step 5: Click "Upgrade" and the device will check if the firmware file is correct. If it’s correct, the
firmware will be imported to the device, and the device will reboot after upgrading is completed.
Note
: Any operation on Ursalink ToolBox is not allowed during upgrading, otherwise the
upgrading will be interrupted, or even the device will be broken down.
Click "Reset", and the device will restore to the factory default settings.
Summary of Contents for UC1114
Page 1: ......