![urmet domus 826 DIGITAL CALL SYSTEM Manual Download Page 51](http://html1.mh-extra.com/html/urmet-domus/826-digital-call-system/826-digital-call-system_manual_1062556051.webp)
826
Each such message terminates with the carriage return character.
After every 64 messages, the switchboard station will send a new page
command to the printer.
During printer confi guration, the AUTO LINE FEED parameter must be
set to “ON”.
“Call Queued” message
Each time a call code is stored in the queue memory, the switchboard
station sends the following information to the printer (in the example
below, date, time and apartment station code are purely indicative):
07/08/91 16:30:18 1244 -> SWITCHBOARD [QUEUE]
“Call from Switchboard Station” message
Each the switchboard attendant calls an apartment station using the
call button (8) or the Call from Queue key (6), the switchboard station
sends the following information to the printer:
07/08/91 16:30:18 SWITCHBOARD — >1244
[CALL]
Only one message will be sent to the printer if consecutive calls are
made to the same apartment station.
“Call Deleted from Queue” message
When the attendant deletes a call from the queue memory, the
switchboard station sends the following information to the printer:
07/08191 16:30:18 1244 [DEL]
RECOMMENDED SERIAL PRINTER
After extensive laboratory testing URMET DOMUS recommends the
following printer.:
KODAK DICONIX 180si
The Diconix 180si is an extremely quiet portable ink-jet printer.
Provided with a serial interface, it can operate with continuous format
paper with page lengths of 11 or 12 inches. It can also operate with
single A4 sheets, but this format cannot be used with the switchboard
station.
In addition, the printer is easily confi gured.
Printer preparation consists of installing the printhead cartridge with
incorporated ink reservoir and the blotter pad which keeps the
printhead clean. For these operations, see the paragraphs headed
“Installing the blotter pad” and “Installing the printhead cartridge” on
pages 9, 10 and 11 of the user’s manual supplied with the printer.
No special maintenance procedures are required for the printer.
When print becomes faint, replace the printhead cartridge. Cartridge
printing capacity is around 500 pages.
The printer is portable (weigh 1.3 kg) and is provided with fi ve NiCd
batteries which ensure that it can continue to operate in the event of a
power outage (for battery installation, see the user’s manual).
Printer preparation is completed by installing continuous format paper.
Page length may be 11” or 12”.
NOTICE:
THE PRINTER IS NORMALLY SUPPLIED WITHOUT THE
CONNECTING CABLE. WHEN ORDERING, SPECIFY A SERIAL
PRINTER CABLE WITH ONE FEMALE DB9 CONNECTOR AND
ONE MALE DB25 CONNECTOR.
Printer confi guration
To access the programming cycle, turn on the printer and hold down
the “ON LINE” key. The unit will print out the current confi guration
settings and provide menus for selecting the desired options.
DIGITAL GUARD DOOR SWITCHBOARD STATION Ref. 826/18
INSTALLATION
Note:
The following confi guration applies to switchboard stations
starting from release 1.2 of June 18, 1992.
Printer Set-Up Parameters
Current Printer Setting
(1) Emulation
= EPSON FX-85
(2) Page Length
= 11 Inches
(3) Perforation Skip
= On
(4) Character Set
= USA
(5) Character Default
= Set l
(6) Carriage Return
= CR + LF
(7) Line Feed
= LF + CR
(8) Graphic Print Dir
= Unidirectional
(9) LF/Graphic/Pitch Mode
= Normal
(10) Protocol
= RDY/BUSY
(11) Parity
= None
(12) Data Length
= 8 bit
(13) Baud Rates (Stop Bits)
= 2400 (1)
Use the following key functions to change printer settings:
* On-Line key will move selection position to the left.
* LF/FF key will mode selection position to the right.
* Font key will enter selection. Emphasized choices in menus =
current settings.
Exit 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13)
The printhead can be moved to the parameter to be changed using the
On-Line and LF/FF keys.
For example, to change page length from 11 to 12 inches, position the
printhead in column 2) and then press ENTER (Font).
The following printout will be produced:
* Page Length *
11
Inches
12 Inches
A4 Size
Select “12 Inches”
Exit 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13)
Move printhead to “Exit” and press ENTER.
New Printer Setting
(1) Emulation
= EPSON FX-85
(2) Page Length
= 12 Inches
(3) Perforation Skip
= On
(4) Character Set
= USA
(5) Character Default
= Set l
(6) Carriage Return
= CR + LF
(7) Line Feed
= LF + CR
(8) Graphic Print Dir
= Unidirectional
(9) LF/Graphic/Pitch Mode
= Normal
(10) Protocol
= RDY/BUSY
(11) Parity
= None
(12) Data Length
=8 bit
(13) Baud Rates (Stop Bits)
= 2400 (1)
Save changes?
YES
NO
Changes another
Reset to defaults
Select “YES” and press ENTER
* * Just Saved * *
The printer confi guration cycle ends with this printout.
On Line
−
MOVE
LF/FF
MOVE
−
Font
ENTER
D
IG
ITAL
GU
AR
D
D
OOR
S
W
IT
C
HB
OAR
D
S
TATION
R
e
f.
826
/1
8
GU
AR
D
D
OOR
S
TATION
E
Q
U
IPMENT
1
- 43
MT124-019
Summary of Contents for 826 DIGITAL CALL SYSTEM
