manualshive.com logo in svg

Urban MilkShuttle, Operating Instructions Manual

Share
Download
Urban MilkShuttle Operating Instructions Manual Download Page 7

For your safety

7

2

For your safety

2.1

Symbols used in these operating instructions

DANGER

Identifies a danger that 

will

 cause death or serious injuries if not avoided..

DANGER

WARNING

Identifies a danger that 

can

 cause death or serious injuries if not avoided.

WARNING

CAUTION

Identifies a danger that can cause light or medium injuries or material damage if 
not avoided.

CAUTION

Danger of crushing

This symbol warns you of the danger of crushing parts of your body in moving 
machine parts.

Self-starting machine parts

This symbols warns of the dangers due to self-starting machine parts.

Electrical voltage

This symbol warns of the dangers of electric shock due to high electrical voltage.

Information

This symbol identifies references and tips that can be used, for example, for 
especially economical and environmentally-friendly operation.

INFO

Summary of Contents for MilkShuttle

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands