manualshive.com logo in svg

Urban MilkShuttle, Operating Instructions Manual, Page: 25 / 88

Share
Download
Urban MilkShuttle Operating Instructions Manual Download Page 25

Start-up

25

5.5.2

Connecting to the power supply

To connect the device, you will need a connecting cable with the appropriate plug 
connectors (CEE blue or red, not included).

1. Connect the plugs of the cable to the fixed socket outlet.

2. Lay the connecting cable so that it doesn't pose a stumbling hazard.

3. Connect the other end of the connecting cable to the outlet of the "Milk Shuttle" 

 

(see figure 5/3)

.

4. Leave the device connected to the power supply for approx. 12 hours to charge 

the internal batteries.

CAUTION

There may be no 

rolled-up 

 cable reel in the supply lead.

Fire hazard!

CAUTION

a

b

 Figure 5/3: Electrical connection at the Milk Shuttle (examples)

a: CEE blue, 3-pin (230 V AC)
b: CEE red, 5-pin (400 V AC)

  

Information

Whilst the battery is charging, you can familiarize yourself with the device and do 
the programming.

INFO

Summary of Contents for MilkShuttle

























































































Reviews:

No comments