Upright X26N, Service & Parts Manual

Page: 41 / 100

Section 3 - Service & Repair Hydraulics
508244-002 Page 3-11
M
A I N
H
Y D R A U L I C
M
A N I F O L D
Though it is not necessary to remove the manifold to perform all maintenance procedures, a determination
should be made prior to beginning as to whether or not the manifold should be removed before mainte-
nance procedures begin.
Figure 3-11: Valve Location
Figure 3-12:
S
E T T I N G
H
Y D R A U L I C
M
A N I F O L D
P
R E S S U R E S
W A R N I N G
! !
The hydraulic oil may be of sufficient temperature to cause burns. Wear safety gloves and safety glasses
when handling hot oil.
The oil in the hydraulic system is under very high pressure which can easily cause severe cuts. Obtain
medical assistance immediately if cut by hydraulic oil.
NOTE: Check the hydraulic pressures whenever the pump, manifold or relief valves have been serviced or replaced
1 TEST PORT1
2 FITTING, 1/4” - 1/4” MALE/MALE
3 FITTING, 3/8” - 3/8” MALE/MALE
4 FITTING, 1/2” - 1/2” (MALE/MALE)
5 CROSS LINE RELIEF VALVE (DRIVE)
6 VALVE, SOLENOID (DRIVE) 7 VALVE, SOLENOID (DRIVE/LIFT)
8 PRESSURE RELIEF (MAIN LIFT)
9 VALVE, SOLENOID (STEERING)
10 FLOW RESTRICTOR (STEERING)
11 RELIEF VALVE (STEERING)
12 RELIEF VALVE (MAIN RELIEF)