Upright X26N, Service & Parts Manual

Page: 13 / 100

3 S
PECIAL
L
IMITATIONS
Page 2 - 5
3 S
PECIAL
L
IMITATIONS
!
D A G E R
!
Travel with the platform raised is limited to creep speed range.
Elevating the Work Platform is limited to
firm, level surfaces ONLY.
!
A N G E R
!
3 S
PECIAL
L
IMITATIONS
The elevating function shall
ONLY
be used when the work platform is level, and on a firm surface.
The work platform is
NOT
intended to be driven over uneven, rough, or soft terrain.
P
L A T F O R M
C
A P A C I T Y
The maximum capacity for the MACHINE, including occupants is determined by model and options, and is
listed in “Specifications” on page 20.
DO NOT
exceed the maximum platform capacity or the platform occupancy limits for this machine.
M
A N U A L
F
O R C E
Manual force is the force applied by the occupants to objects such as walls or other structures outside the
work platform. The maximum allowable manual force is limited to 200 N (
45 lbs.
) of force per preson,
with a maximum of 400 N (
90 lbs.
) for two or more occupants.
!
D N G E R
!
DO NOT
exceed the maximum amount of manual force for this machine.
L
I F T
O
V E R L O A D
A
L A R M
All models include a feature that alerts the operator when the platform load is exceeded. If the alarm
sounds during the lift function, lower the platform and reduce the platform load.
!
DN G E R
!
NEVER
operate the machine with a platform load greater than the rated capacity and never in wind conditions
that exceed the maximum allowable for this machine (Beaufort 4). Refer wind chart on page
7
Page 5
D A N G E R ! !
D A N G E R ! !
D A N G E R ! !
D A N G E R ! !
D A N G E R ! !