Upright X26N, Service & Parts Manual

Page: 33 / 100

Section 3 - Service & Repair Supporting Elevating Assembly
508244-002 Page 3-3
3-1 S
UPPORTING
E
LEVATING
A
SSEMBLY
W A R N I N G
!
!
Never perform service on the work platform in the elevating assembly area while platform is elevated
without first blocking the elevating assembly.
DO NOT stand in elevating assembly area while deploying or storing brace.
Figure 3-1:
Elevating Assembly Brace
I
N S T A L L A T I O N
1. Park the machine on a firm, level surface.
2. Pull Chassis Emergency Stop Switch to the ON
position.
3. Pull Platform Emergency Stop Switch to the ON
position.
4. Turn and hold the Chassis Key Switch to CHASSIS.
5. Push the Chassis Lift/Lower Switch to LIFT to elevate
the platform until the maintenance brace can be
rotated to the vertical position.
6. From the rear of the machine, lift the maintenance
brace from its stowed position. Rotate upward and
outward, then down until it is hanging vertically below
its attachment point.
7. Lower the platform by pushing the Chassis Lift/Lower
Switch to LOWER and gradually lower the platform
until the maintenance brace is supporting the platform.
R
E M O V A L
1. Using the Chassis Controls, gradually elevate the
platform until the maintenance brace is clear.
2. Rotate the maintenance brace outward and upward over its attachment point until it rests in the
stowed position.
3. Lower the platform by pushing the Chassis Lift/Lower Switch to LOWER to completely lower the
platform.
3-2 P
REVENTATIVE
M
AINTENANCE
The complete inspection consists of periodic visual and operational checks, along with periodic minor
adjustments to assure proper performance. Daily inspection will prevent abnormal wear and prolong the
life of all systems. The inspection and maintenance schedule is to be performed at regular intervals.
Inspection and maintenance shall be performed by personnel who are trained and familiar with mechanical
and electrical procedures.
W A R N I N G
!
!
Before performing preventative maintenance, familiarize yourself with the operation of the machine.
Always block the elevating assembly whenever it is necessary to enter the scissor assembly to perform
maintenance while the platform is elevated.
The preventative maintenance table has been designed for machine service and maintenance repair.
Please copy the following page and use the table as a checklist when inspecting the machine for service.