Upright ab62, Service And Parts Manual

Page: 18 / 146

2-8 AB62 Work Platform - European
M
ACHINE
P
REPARATION
& O
PERATION
Section
2.6
2.6 M
AINTENANCE
Fueling
Gasoline
1. Open left turret cover, then open fill cap.
See Figure 2-8.
2. Fill to capacity with unleaded motor fuel only.
3. Fuel tank full capacity is 159 L 42 US gallons.
Diesel
1. Open left turret cover, then open fill cap.
See Figure 2-8.
2. Fill to capacity with diesel motor fuel only, grade
#1-D or #2-D. Use distillate fuel only; do not use
residual or blend.
3. Fuel tank full capacity is 159 L (42 US gallons).
Hydraulic Oil
1. Open turret cover and check oil level at sight
gauge with the boom stowed and retracted;
engine running or stopped. See Figure 2-9.
2. If necessary, fill to capacity with clean ISO 46
compatible hydraulic oil.
3. Clean area around cap before opening.
4. Open filler/breather cap to add hydraulic oil.
5. Replace cap.
Lubrication
Refer to Maintenance Section for lubrication chart
and guidelines.
Figure 2-8: Fuel Tank
Battery Maintenance
Check battery fluid level daily, especially if the work
platform is being used in a warm, dry climate.
If electrolyte level is lower than 10mm (3/8 in.) above
the plates, add distilled water only. DO NOT use tap
water; it will shorten battery life.
Tires
Tire selection can affect the stability of the machine.
Use only tires supplied by UpRight unless approved
by the manufacturer in writing. Check air filled tire
pressure daily 5.5 bar (80 psi).
Figure 2-9: Hydraulic Oil Tank
Fuel Cap
W A R N I N G
! !
Hazard of explosive gas mixture. Keep sparks,
flame and smoking materials away from batter-
ies.
Always wear safety glasses when working with
batteries.
Battery fluid is highly corrosive. Rinse away any
spilled fluid thoroughly with clean water.
Level Gauge
Hydraulic Oil Filler Cap