16
Registering Additional Components
For additional components added to your system, register them as follows:
NOTE:
For additional keyfobs, see
Registering Keyfobs,
page
16.
To register additional components:
1.
Remove the component cover.
2.
At the control panel, press and hold
for about 3 seconds
(disregard the ENTER USER CODE message) until REGISTER and
TRANSMIT 1 display.
3.
Now remove the battery protector strip or plastic wrapping (if you
have to remove the battery in order to do this, make sure the
battery is then inserted in the component with the correct polarity);
TRANSMIT 2 displays.
4.
Press the component’s tamper switch and then release it; the
(automatically-generated) zone number and SAVE? display.
IMPORTANT:
In the listing provided write down the zone
number, component name, and its location / description.
5.
Press
to save the registration, or press
to cancel.
6.
Attach the (registered) component’s cover correctly in place.
7.
Repeat this procedure from step 3 to register the next component,
or if finished, press
to exit the registration mode.
Registering Keyfobs
To register keyfobs:
1.
At the control panel, press and hold
for about 3 seconds
(disregarding the ENTER USER CODE message) until REGISTER
and TRANSMIT 1 display.
2.
Press any keyfob button; REGISTER and TRANSMIT 2 display.
3.
Press the same keyfob button again; the keyfob number and
SAVE? display.
IMPORTANT:
In the listing provided write down the keyfob
number, and the user who retains it.
Summary of Contents for SecuPlace WiFi
Page 21: ...21 OR ...
Page 22: ...22 ...
