English
4
The kit XC236 has been issued to allow the following interventions on the
XBC-XVC control board:
1. Data storing: it is possible to store the cooking chamber and the core probe temperatures values taken
inside the oven and all the connected appliances (provers, holding cabinets, blast chillers, etc…). This kind
of records, once stored and transfer to a PC; can be printed with the Ovex.NET® 3.0 program.
2. Cooking programs management: the cooking programs can be rolled out from the oven to the USB
memory and vice versa. The cooking programs can be written with the Ovex.NET® 3.0 program, then
stored on the USB memory and rolled out to the oven.
3. Firmware updating: it is possible to update the firmware of the appliances in order to add new
functions.
Warning
Connect and disconnect the bridge to and from the oven only after the appliances have been discon-
nected from the power supply.
The USB memory can be connected and disconnected at any time but, in case the bridge is operating
(for example for log storing), the data which are being processed may be misregistered.
Inside USB memory is the UNOXDIR folder and all the subfolders necessary for a correct operation.
The Ovex Net 3.0 software is able to issue this kind of files. Refer to the software instructions.
The XC236 properly operates only if the issued USB memory is used: in case different USB memories
are used, the XC236 may not correctly operates.
Use of the bridge
To enter the bridge menu push the “SELEZIONE APPARECCHI” button until the display 5
(SELEZIONE APPARECCHI) shows number 9.
Now it is possible to scroll down the 3 operating modes by pushing the “STEP” button: the display 1 (STEP)
shows the selected mode.
1. Data storing
2. Cooking programs management
3. Firmware updating
ChefTouch / BakerTouch Control panel layout:
INSTRUCTIONS FOR THE USER
