English
8
When necessary use the USB interface Unox as logger, before set the correct date and time. If the USB
interface is disconnected from the power for more than 20 days, it is necessary to re-program date
and time.
To set date and time proceed as follows:
• Ensure all the appliances are connected (ovens, holding cabinets, provers, blast chillers) but not working.
• With the button “SELEZIONE APPARECCHI” select appliance no. 1
• Hold the buttons “+” e “-“ at the same time for 5 seconds to enter in the hidden menu.
• Push the button “SELEZIONE APPARECCHI” until display 2 shows no. 9
• Push the button “SELECT” until display no. 3 shows “YEA”
• On display no. 4 appears the year set
• With buttons “+” e “-“ set the year
• Push the button “SELECT”: on display 3 appears “MON”
• On display 4 appears the month set
• With buttons “+” e “-“ set the month
• Push the button “SELECT”: on display 3 appears “DAY”
• On display 4 appears the day set
• With buttons “+” e “-“ set the day
• Push the buttons “SELECT”: on display 3 appears “HOU”
• On display 4 appears the hour set
• With buttons “+” e “-“ set the hour
• Push the button “SELECT”: on display 3 appears “MIN”
• On display 4 appears set the minutes (time)
• With buttons “+” e “-“ set the minutes (time)
• Push the button “SELECT” once again
• Push the button “P” to exit the hidden menu
Setting date and time
