11
2.
Set the IP address and port for the FTP server, username and password used to upload images to the
FTP server, select
Upload Images
,
Overwrite Storage
and set
Overwrite At
(threshold for overwriting
images).
Some camera models support FTP test. You may test FTP after completing FTP settings correctly.
3.
Set the path for saving snapshots on the FTP server and the file name format. For example, set path as
Date-YYYY\\Date-MM\\Date-DD\\Hour(s), and set file name as Date-YYYY-Date-MM-Date-DD.jpg.
4.
Click
Save
.
After the configuration of E-mail, when alarms are triggered, you will be able to send messages to the
specified E-mail address (This function is not supported by some models).
1.
Click
Setup
>
Network
>
E-mail.
2.
Configure relevant parameters of the sender and the recipient. Some camera models support Email test.
You may test email after setting the recipient address. The following table describes some major
parameters.
Parameter
Description
TLS/SSL
When enabled, the e-mail will be encrypted using TLS (Transport Layer Security) or
Secure Socket Layer (SSL) to protect privacy.
First it tries to send through an SSL connection. If the SMTP server supports SSL, the
e-mail will be sent through the SSL connection; otherwise, it tries to send using
STARTTLS.
Attach Image
When enabled, the e-mail will contain 3 instant snapshots as attachment according to
the Capture Interval.
Username/Password Username and password of the registration email address.
3.
Click
Save
.
