Universal Laser Systems ULS-25PS, Operation Manual

Page: 18 / 100

4. Double-click on the “Add Printer” icon.
5. When the “Add Printer Wizard” appears click “Next”.
6. Select “Local Printer” and click “Next”.
7. When the “Manufacturer” and “Printers” menu list appears click “Have Disk”
(Do not look for the printer in the menu)
8. Insert the driver disk.
9. Make sure the dialog box matches the floppy drive you are using: “A:\” or “B:\”.
10. Click on “OK”.
11. When the list of “Printers” appears choose the appropriate laser system (or the “R”
version if you purchased the Rubber Stamp Option).
12. Click on “Next”.
13. Choose the port your laser system is connected to and click on “Next”.
14. If you would like to name the laser system a different name then rename it now.
15. Choose if you would like to set it as your default printer and click on “Next”.
16. Select “No” when it asks to print a test page, and then click on “Finish”.
17. Click on the laser system, then click on “File” and drag the mouse to “Properties”.
18. Click on “Details” and then click on “Setup”.
19. The driver settings screen will appear. Click on “OK” and then “OK” once again.
This step is important because it will allow the driver to write the Laser.ini file to your
c:\windows subdirectory. This file is essential for proper driver operation.
20. Driver installation is now complete. Store your driver disk in a safe place.
2.9
Installing the ULS Printer Driver for Macintosh
Installation of the ULS Printer Driver for Macintosh will allow Macintosh computers
running system 7.0 or higher to interface with the laser engraving system. This driver is
installed in the same way most other Macintosh printer drivers are, and a simple step-
by-step installation procedure is outlined below. A complete understanding of how the
Macintosh operating system works is essential to the operation of the laser system.
Please consult your Macintosh owner's manual for answers to any question you might
have on operating your Macintosh computer.
18