Universal Laser Systems ULS-25PS, Operation Manual

Page: 77 / 100

MELAMINE - STANDARD ENGRAVING
TYPE MACHINE POWER SPEED PPI PASS DEPTH
RASTER 25 WATT 100 70 500 1 .015”
ENGRAVING 50 WATT 75 100 500 1 .015”
COMMENTS: Engrave unmasked.
TYPE MACHINE POWER SPEED PPI PASS DEPTH
DEEP RASTER 25 WATT 100 50 500 1 .020”
ENGRAVING 50 WATT 100 100 500 1 .020”
COMMENTS: Engrave unmasked.
TYPE MACHINE POWER SPEED PPI PASS DEPTH
VECTOR 25 WATT 20 4.0 500 1 .010”
ENGRAVING 50 WATT 10 4.0 500 1 .010”
COMMENTS:
Engrave unmasked.
ADDITIONAL COMMENTS
Engraving melamine is very similar to engraving regular wood with the added benefit of
a consistent surface finish and uniform base material composition. Unlike regular wood
which has grain patterns and density variations, melamine when laser engraved
produces a flat and even engraved area. This characteristic gives this material superior
engraving and paint filling qualities. Masking can be used if desired but it is just as easy
to spray the engraved area with water and wipe down with a chamois cloth to remove
the smoke residue. Since the top surface material is consistent in texture and color,
engraving photographs or highly detailed images produces exceptional results. Refer to
the next example on engraving photographs and/or ClipArt.
77