Universal Laser Systems ULS-25PS, Operation Manual

Page: 85 / 100

Section 5 - Basic Maintenance
5.1 General Cleaning and Maintenance Supplies
Keeping the laser system clean will ensure the highest quality engraving. The
frequency of cleaning will depend entirely on the type of material being engraved, the
performance of your exhaust blower, the operating environment, and the amount of
laser system usage over a given period of time. Dirt or debris that is allowed to build up
on the motion system components will cause uneven or rough engraving, or loss of
engraving position as well as premature component failure. Smoke or dirt buildup on
the optics can cause damage to them, loss of laser power, or premature failure of
these components. Use good judgment and keep in mind that a clean machine is the
best performing machine. Below is our suggested maintenance schedule.
WARNING
Always turn the laser engraving system off and unplug it before performing
any cleaning procedures.
Suggested Cleaning and Maintenance Supplies
•
Soap solution mixture of 1 tablespoon (2 cl) liquid soap and 1 quart (liter) of water in
a spray bottle
•
Paper towels
•
Cotton cloth
•
Denatured alcohol ( NOT to be used on any painted surface, plastic, or the Top
Window)
•
Acetone (can be used on the engraving table but nowhere else)
•
Cotton swabs (supplied)
•
Lens cleaner (supplied)
•
Lens tissue (supplied)
•
Vacuum cleaner
•
Set of Allen wrenches sized from .050 to 3/16 inch
*NOTE:
When using acetone or denatured alcohol, please follow the instructions on
the printed label of these materials for safe handling procedures.
Please familiarize yourself with the motion system components in the following diagram.
It will help you understand which components will need cleaning or adjustments that will
be defined in these procedures:
85