Universal Laser Systems ULS-25PS, Operation Manual

Page: 66 / 100

ACRYLIC - MIRRORED
TYPE MACHINE POWER SPEED PPI PASS DEPTH
LIGHT RASTER 25 WATT 30 100 500 1 .003”
ENGRAVING 50 WATT 15 100 500 1 .003”
COMMENTS:
Engrave unmasked and on the backside in reverse text. Engraving on
the front side of mirrored acrylic will visually produce a double image.
TYPE MACHINE POWER SPEED PPI PASS DEPTH
DEEP RASTER 25 WATT 100 70 500 1 .010”
ENGRAVING 50 WATT 70 100 500 1 .010”
COMMENTS:
Masking is not necessary because the acrylic is protected from smoke
damage by the mirrored backing.
TYPE MACHINE POWER SPEED PPI PASS DEPTH
VECTOR 25 WATT 5 4.0 500 1 .005”
ENGRAVING 50 WATT 3 4.0 500 1 .005”
COMMENTS:
Again, masking is not necessary because the acrylic is protected from
smoke damage by the mirrored backing.
TYPE MACHINE POWER SPEED PPI PASS DEPTH
VECTOR 25 WATT 75 1.6 500 1 .1”
CUTTING 50 WATT 75 3.2 500 1 .1”
COMMENTS:
Make sure both sides are masked. Dampen and elevate at least 1/8”
above the engraving table. Two passes make a cleaner cut than one. Cut from the
front side of the mirror to prevent heat distortion of the mirrored back surface.
66