1 Basic - Information
P3 240-840A
3
Electronic equipment is not fault proof. This fact should be borne in mind for all
possible operating conditions.
Before installation or commissioning begins, this manual must be thoroughly read
and understood by the technical staff involved.
If any uncertainty arises, the manufacturer or dealer should be contacted.
P3 devices are power electric parts used for regulating energy flow.
Protection rating IP00.
Standards and guidelines
The device and its associated components can only be installed and switched on
where the local regulations and technical standards have been strictly adhered to:
EU Guidelines
89/392/EWG, 84/528/EWG, 86/663/EWG, 72/23/EWG
EN60204, EN50178, EN60439-1, EN60146, EN61800-3
IEC/UL
IEC364, IEC 664, UL508C, UL840
VDE Regulations
VDE100, VDE110, VDE160
TÜV Regulations
Trade body guidelines
VGB4
The user must ensure that in the event of:
- device failure
- incorrect operation
- loss of regulation or control
the axis will be safely de-activated.
It must also be ensured that the machine or equipment are fitted with device
independent monitoring and safety features.
Setting adjustments
- should only be carried out by suitably trained personnel
- should only be carried out in accordance with health and safety guidelines
Assembly
- should only be carried out when all voltages have been removed.
QS
Test results are archived with the device serial number by the manufacturer.
CE
The device adheres to the following: Guideline EU 89/336/EWG. EMC standards
EN61000-2 and EN61000-4.
Sa
fe
ty
a
d
vi
ce
-
St
a
n
d
a
rd
s
a
n
d
g
u
id
el
in
es
ATTENTION - High voltage
500V
~
ac, 650V=dc
