Unitek 9100 Series, User Manual

Page: 12 / 34

CHAPTER 1: SYSTEM DESCRIPTION
9100 SERIES REFLOW SOLDERING SYSTEM
1-6 990-606
Access Doors
The workstation has three points of access, as shown in figure 1-4. The work area enclosure can be
accessed for servicing by either lifting the front half of the enclosure, or opening the access door in the rear
of the closure. These access points are monitored with interlock switches to prevent operation of the unit
when they are opened (unless the GUARD OVERRIDE key switch is activated).
On the right-hand side of the workstation, a pair of lockable doors allow access to the electronics for
installation and servicing.
Electrical Connectors
Figure 1-4 shows the location of external connectors for connecting equipment (including the Uniflow and
the Bonding Head).
Figure 1-4. Location of Access Panels and External Electrical Connectors
110 VOLT CONNECTOR