background image

Instruction Manual

Soldering Flow Pot

Thank you for purchasing the HAKKO 487

Soldering Flow Pot.

Please read this instruction manual thoroughly

before operating the HAKKO 487.

Store the manual in a safe, easily accessible

place for future reference.

                    

TABLE OF CONTENTS

1. CONSTRUCTION......................................................

2. OPERATION..............................................................

3. MAINTENANCE.........................................................

4. CLEANING THE INSIDE OF THE SOLDER BATH...

5. SPECIFICATIONS.....................................................

1

2

2

3

5

2020.3

MA00186XZ200330

© 2004-2020 HAKKO Corporation. All Rights Reserved.

OVERSEAS AFFILIATES

U.S.A.: AMERICAN HAKKO PRODUCTS, INC.

TEL: (661) 294-0090 FAX: (661) 294-0096

Toll Free (800) 88-HAKKO   

                                   4   2   5   5   6

https://www.HakkoUSA.com  E-mail: [email protected] 

SINGAPORE: HAKKO PRODUCTS PTE., LTD.

TEL: 6748-2277 FAX: 6744-0033

https://www.hakko.com.sg     E-mail: [email protected]

HONG KONG: HAKKO DEVELOPMENT CO., LTD.

TEL: 2811-5588 FAX: 2590-0217

https://www.hakko.com.cn     E-mail: [email protected]

Please access the web address below for other distributors.

https://www.hakko.com

HEAD OFFICE

4-5, Shiokusa 2-chome, Naniwa-ku, Osaka 556-0024 JAPAN

TEL: +81-6-6561-3225 FAX: +81-6-6561-8466

https://www.hakko.com  E-mail: [email protected]  

Summary of Contents for 487









Reviews: