TVK 800 User Manual
59
Set up a camera group to display on a monitor group
You can configure the keypad to display the images from a camera group on a group of
monitor
s through a decoder.
When the number of cameras
in a group is less than or equal to the number of video
tiles on-sc
reen (for example eight cameras and nine video tiles), each camera is then
displayed on its corresponding time (for example, camera 1 on video tile 1, camera 2 on
video tile 2…)
When the number of cameras in a group is more than the number of video tiles o
n-
screen (for example
16
cameras and
4
video tiles), the cameras are displayed in th
e
following sequence mode: cameras 1 to 4 are displayed on video tiles 1 to 4, next
cameras 5 to 8 on video tiles 1 to 4, cameras 9 and 12 are displayed on video tiles 1 to
4, and finally cameras 13 to 16
on video tiles 1 to 4.
Note
: The default dwell time is 30
seconds.
An error message will appear in the
Hint box of the shortcut screen when an invalid
action is entered.
To view a camera group on a monitor group:
1. Press the
Num
+
MON-G
keys
to
select the monitor group
.
2. Press the
Num
+
CAM-G
keys to select the camera group to be decoded and
displayed on the monitor group.
Note
: In monitor group
mode
, output channel
s are only displayed
in full
-screen
mode by default.
Set up a tour
A tour is the display of images from a sequence of different
cameras.
You can set up to
64 cameras in a tour.
The dwell time is the time a camera image remains on
-
screen before the image from
the next camera is displayed. The default dwell time is 30
seconds but it can be
modified.
Tour setups are not saved
when the
device is restarted.
An error message will appe
ar in the
Hint box of the shortcut screen when an invalid
action is entered.
