TVK 800 User Manual
57
Note
: If you enter 0 + MON in live view mode, multiview mode is not supported
as video is then displayed on the keypad
.
Display a specific camera on a monitor
You
can select which camera to display on a monitor.
To display a specific camera on a monitor:
1. Press the
Num
+
MON
keys
to
select the monitor
.
2. Press the
Num
+
WIN
keys to select the video tile to be displayed on the mon
itor
Or
Directly touch the keypad window to select the desired video tile.
3. Press the
Num
+
CAM
keys
to
select the camera.
For example, press 1+MON, 2+WIN, 3+CAM to decode the video signal from
Camera 3 and display it on Video tile 2
of Monitor 1.
Set up a camera group to display on a monitor
You can use a decoder to
configure the keypad to display the
images from a camera
group on a
monitor
.
When the number of cameras
in a group is l
ess than or equal to the number of video
tiles on-
screen (for example
three
cameras and four
video tiles), each camera is then
displayed on its corresponding time (for example, camera 1 on video tile 1, camera 2 on
video tile 2…)
When the number of cameras in a group is more than the number of video tiles on
-
screen (for example
16
cameras and
4
video tiles), the
cameras are displayed in th
e
following sequence mode: cameras 1 to 4
are
displayed on video tiles 1 to 4
,
next
cameras
5 to 8 on video tiles 1 to 4
, cameras
9 and 12
are displayed on video tiles 1
to
4,
and finally cameras 13 to 16
on video tiles 1 to 4.
Note
: The default dwell time is 30
seconds.
An error message will appear in the
Hint box of the shortcut screen when an invalid
action is entered.
